Skip to content

Use "USA" code for a 10% OFF until August!

    How to Make a Bow for a Wreath

    How to make a bow for a wreath

     If you're looking for a way to add a touch of festive cheer to your home this holiday season, why not try making a bow for your wreath? It's easy to do and only requires a few materials. Plus, it'll make your wreath look even more special.

    Our article will show you how to make a bow for a wreath using various easy methods. If you are not a crafty person, make sure to check our pre-made wreaths with ribbons.


    The Art of Making a Bow for a Wreath


    Making a bow for a wreath is a simple way to add elegance and color to your holiday decor. You can use any materials, but the steps are the same.

    1. First, gather your materials. You'll need a piece of fabric wide and long enough to wrap around the wreath several times. A ribbon or twine also work well, and any similar material will do.
    2. Next, cut the fabric into a strip. Make sure to leave enough slack to easily attach the other end of the ribbon or twine to another corner of the fabric.
    3. Now it's time to start creating bows! Use a glue gun to attach each bow in an approximately 1-inch-wide band around both ends of the ribbon. Make sure that each band is evenly spaced around the circumference of the bow.
    4. Attach the bow to your wreath.

    We'll dive in the process below.


    What You'll Need to Make a Wreath Bow

    The following materials are needed:

    • The wreath itself
    • Ribbon, fabric, or wire
    • Hot glue gun¬†or glue sticks
    • Knife or scissors to cut the ribbon or fabric

    Materials You Need to Make a Wreath Bow

    Step-by-step Guide to Making a Bow for a Wreath

    Making a bow for a wreath is easier than it may seem. Here are five steps to help you get the job done.

    1. A hot glue gun, scissors, and a segment of fabric or a ribbon are all you need for making a bow. 
    2. Cut your ribbon to the desired length. A good rule of thumb is to make the ribbon twice as long as you want the finished bow's diameter to be.

    Making a Bow for a Wreath
    3. Make a loop with the ribbon and secure it in place with a dot of hot glue. This will be the center of your bow.
    Making a Bow for a Wreath
    4. Make two more loops on either side of the center loop and secure them in place with hot glue. These will be the outer loops of your bow.
    Making a Bow for a Wreath
    5. Trim any excess ribbon from the ends of the bow and display your finished product proudly!

    The Final Assembly

    1. Gather your materials. The finished bow, a wire, sandpaper, and paint or a similar sealant.
    2. Attach the bow to the end of the dowel and screw it on. The string should not be visible once wound around the dowel, so cut the wire, leaving a little slack. Wrap the wire several times around the dowel, trimming any excess.
    3. Let the wire dry completely before painting or sealing it. Using sandpaper, attach the wire ends to either side of the bow's stem.
    4. Lastly, wind the bow around your wreath's stem a few times and place it on top.

    Christmas Wreath Bow Tutorial

    How to make a ribbon bow for a wreath

    There are several ways to make a Christmas wreath bow. Here's how:

    1. Cut a strip of fabric about 2 inches wide and long enough to wrap around the wreath three times. 
    2. Sew the ends of the strip together, then turn it right-side out and press. 
    3. Glue the strip around the wreath, then hot glue the ends of the strip to the back of the bow.

    Best Way to Make a Burlap Bow

    If you're looking for a rustic bow to adorn your Christmas wreath, look no further than a piece of burlap! This versatile material can be easily turned into a bow by following these simple steps:

    How to make a burlap bow for a wreath

    1. Start by cutting a burlap to the desired shape and size. 
    2. Ensure the finished bow is at least 2 inches wide and 3 inches long.

    How to make a burlap ribbon bow for a wreath

    3. Use hot glue or a similar adhesive to attach the burlap bow to a sturdy wooden dowel rod. 
    4. Burlap and wood rods should be well-bonded with glue.

    How to make a ribbon bow for a wreath

    5. Finally, add festive embellishments such as leaves, berries, and pinecones to finish your rustic bow!


    Note: If you want to add a rustic flair to your Christmas decor, making a burlap bow is the perfect solution!


    How to Make a Tied Ribbon Wreath

    How to make a bow for a wreath with ribbon

    There are many ways to make a tied ribbon wreath, but here are some tips:



    The easiest way is to tie a ribbon around the flower's stem that is about an inch wide. If you have more than one flower to put in your wreath, tie each loop together before placing the wreath on your head. If you have a lot of flowers, you can also use wire hangers to hang your wreath.

    1. First, cut the wire hanger to the desired length and then loop it around the flower's stem.
    2. Make sure to put the loop between the petals, so it's covered.
    3. To secure the hanger, wrap the wire around the other end and twist.

    Creating a Layered Wreath Bow

    Making a layered bow for a wreath is a simple process that can be done in minutes. By adding different materials to the layers of your bow, you can create a unique and personalized wreath accessory.

    How to make a layered bow for wreath

    Materials required:

    • Wreath Form or another round object¬†
    • String or ribbon
    • Bowl or vase filled with water
    • Paint or another creative medium¬†

    Steps to follow:

    1. Start wrapping string around the wreath form, tying it off at one end. 
    2. Make sure the string hangs down evenly on all sides. If desired, add some extra string to the top of the wreath form so you can hang the bow later. 
    3. Next, paint or decorate your bowl/vase with whatever you like - this is purely up to personal preference! 
    4. The decorated vessel should rest on top of the string at the bottom of the wreath form.
    5. Next, add layers of ribbon to the bowl/vase by gently dipping each end into water and wrapping it around several times before knotting it off. 
    6. Continue adding layers until you reach the top of the bowl/vase - make sure each layer is secured with a knot before continuing to the next layer! 
    7. Finally, take your final layer of ribbon and tie it in a knot at either end above where you tied off.

    How to Make a Bow for a Door Wreath

    How to make a bow for a wreath
    Making a bow for a door wreath is an easy way to add extra decoration to your holiday decor. All you need is some string, a bowl or jar, and an ornament.
    1. Start by tying the string around the ornament in a loop.
    2. Make sure that the center of the loop is at the top of the ornament.
    3. Take the other end of the string and tie it around the bowl or jar, making sure it hangs down below the ornament by about an inch.
    4. The knot should be tight enough so the string doesn't move, but loose enough to be easily undone if needed.
    5. Depending on your hinge's strength, hang your ornament on your door hinges using screws or nails.

    Now you're ready to hang your bow on your door wreath!


    Tips for Making a Beautiful Bow for a Wreath


    Making a beautiful bow for a wreath can be done in various ways. The following tips will help you create an impressive bow that will look good on your tree or doorframe.

  • Choose¬†a suitable material: Wood is the traditional material for bows, but any strong, flexible material can be used, such as plastic tubing or even wire hangers. Make sure the material you select is large enough to provide a comfortable fit around the head of your arrow and long enough to cover at least half of the string's length.
  • ¬†
  • Cut the material to shape: To make the best bow, start by cutting out a simple shape from the material using a knife or scissors. You can either round off the top or bottom of your shape or create a more intricate design. Keep the size and shape consistent throughout your bow pieces to look uniform when assembled.
  • ¬†
  • Attach pieces: Once you have cut out your pieces, it's time to attach them using hot glue, wire ties, or even fabric straps if desired.
  • ¬†
  • Final touches: Now that everything is assembled, it's time to add some final details and make your bow look premium! It includes adding decorative cuts into your material, painting or sticker applications, and embellishments like feathers or faux leather.¬†
  • ¬†



    There you have it ‚Äď various ways to make a bow for a wreath! Whether you‚Äôre looking for an easy way to get started or want to try something new, these methods will work.¬†If you want, you can add some extra embellishments to your wreath bow, like beads or sequins. This applies to grand opening ceremonies or business activities.

    But if you keep it simple, you'll have a beautiful bow that's perfect for any holiday wreath. You'll no longer wonder where to buy a ribbon for your wreaths.

    Post written by: Ilia Mundut

    Free Shipping & Returns

    30 - Day guarantee on every order.

    Premium Quality

    Full satisfaction with your purchase or your money back.

    Secure Checkout

    Checkout in a few clicks.